Textile rinse aid Acid Cleaner

Description

Release form: liquid, concentrate for solution preparation.

Purpose: neutralization of residues of alkaline detergents, additional cleaning of textile coatings by extraction.

Solution preparation:

Mix the concentrate with water in a ratio of 1: 100 (100 ml / 10 liters).

Application

The chemical solution can be used in two ways:

Neutralization and post-treatment:

The solution is poured into the extractor tank, after which the textile coating is washed with it. In the process of washing, it is necessary to focus on the residual soapiness of the surface, foaming of the solution and the amount of washed off impurities;

Neutralization – the cleaned textile coating is abundantly sprayed with a solution, the solution is rubbed in with a soft brush to distribute along the fiber, held for 5-10 minutes, after which the reaction products and excess solution are washed off with pure water by extraction.

Precautionary measures:

Do not mix Acid Cleaner concentrate / solution with alkaline cleaning solutions.

Do not allow contact with marble surfaces, take measures to carefully protect surfaces that can be damaged by the acid. 

Before use, test the color fastness of the surface to be cleaned. 

In case of contact with eyes, rinse thoroughly with water and seek medical advice. 

If swallowed, rinse the mouth, drink plenty of water, seek medical advice immediately. Keep out of the reach of children.

Storage conditions: store in a tightly closed container at temperatures from 5 ° C to 40 ° C in an upright position away from sources of heat, open flame, sunlight and atmospheric precipitation.

Composition: prepared water, citric acid, non-surfactant 5-15%.

Concentrate pH: 1.

pH solution: 3.