Stain Remover Gum Remover

Description

Release form: oily liquid in a spray container.

Purpose: removal of sticky chewing gum from textile coverings (upholstery of upholstered furniture, carpets, clothing).

Solution preparation:

The product is ready to use.

Application

Testing:

 Conduct a test application and make sure that the product does not damage the coating, including the adhesive in the fabric, the base of the carpet, and so on.

Preparation: Put plastic wrap and absorbent material if there is a lacquered or painted floor under the carpet. Before the cleaning procedure, place a plastic wrap and absorbent material between the upholstery and the filler.

Removing the stain: 

Apply 1-2 ml of the product to the stain, treat the gum mechanically using a special spatula (spatula), mixing the gum with the stain remover, and let it work for 3-5 minutes. Separate the softened chewing gum from the textile using the spatula and collect with a napkin, rinse the treatment site with a cleaning solution using an extractor. Repeat the procedure if there are traces of gum on the coating.

Precautionary measures:

– it is obligatory to carry out preliminary testing for color fastness;

– it is forbidden to use near sources of open fire! It is forbidden to smoke near the place of work;

– use only in well ventilated areas. When working, it is recommended to use an aerosol respirator and goggles or a full face mask, rubber gloves;

– if swallowed, rinse mouth with water, do not induce vomiting and seek medical advice. In case of contact with eyes, rinse with clean water and consult a doctor;

– do not pour into water bodies and sewers (!);

– keep out of the reach of children.

Composition: nonionic surfactant, mixture of hydrocarbons, perfume.

Storage conditions: store in a tightly closed container in an upright position at a temperature of 5 ° C to 40 ° C, away from heating devices and open flame sources, out of the reach of children. Avoid exposure to direct sunlight and atmospheric precipitation.

pH: no value.