Foam Skin Cleaner

Description

Release form: 

Liquid, ready-to-use foam composition in a bottle with a dispenser-foaming agent.

Purpose:
The product is intended for cleaning the skin of top dyeing, leather substitutes, vinyl coatings from sweat, dust pollution, water-soluble stains. For professional use only!

Solution preparation:

The product is used without dilution. Use only in the original container!

Application:

Apply a little foam to a soft sponge, spread over the surface to be cleaned, if necessary, treat the surface with a soft brush or a brush for cleaning in the depth of the surface relief. 

Collect the solution and dissolved dirt with a soft absorbent cloth. 

Repeat the procedure as necessary.

Upon completion of cleaning, apply a little clean water to the surface using a spray bottle and wipe dry with a soft clean white cloth, if there is a risk of water soaking into the seams or damage to the paint layer, remove the detergent with a damp and dry cloth. 

Allow the surface to dry for 5-15 minutes, and apply and rub Skin Cleaner and Conditioner over the surface according to its instructions.

It is recommended to use Ink Remover to remove ink stains, ink marks, ballpoint pen marks.

Note! Some types of paint change color when wet!

Special precautions:

Carry out a preliminary inspection of the surface, if damage is found, carefully document them.

Test the surface:

Apply a portion of the product on the surfaces and wait for 10-15 minutes, then wipe it with a soft cloth, rub it a little with your finger, if the paint peels off at the test site, the cleaning such material is prohibited. 

Do not use the product for on aniline leather, natural nubuck, leather with a wax top layer. Not recommended for use on perforated skin.

Precautionary measures:

Pretest the product to be cleaned for color fastness. 

Keep out of reach of children, do not eat. 

In case of contact with eyes, rinse thoroughly with water and seek medical advice.

If swallowed, rinse your mouth, drink plenty of water and consult a doctor immediately.

Storage conditions: store in a tightly closed container at a temperature of 5 ° C to 35 ° C in an upright position away from sources of heat, open flame, sunlight and precipitation.

Composition: prepared water, complexing agent, anionic surfactants less than 5%, nonionic surfactants 5-15%, fragrance.

pH conc: 9.0 – 9.5