BioGel stain remover

Description

Release form: 

Gel-like stain remover (stain remover) based on organic solvents and biologically neutral sorbents.

Purpose: 

Stain remover for removing gum, fats, oil products, some paints, and adhesives. The stain remover is most suitable for removing stains from textile surfaces.

Solution preparation:

The product is ready to use, and cannot be diluted or dissolved.

Application:

Stratification of the composition does not constitute a basis for a complaint. Shake well before use!

Apply the stain remover to the surface and wait 5-15 minutes.

Mix the stain remover with the stain again, collect the resulting mass with a spatula on a napkin, and rinse with detergent solution. Repeat processing as necessary. When working with old greasy stains, the stain remover can be left on the stain for a longer time, as the volatile components of the stain remover evaporate, the dissolved dirt will be absorbed into the sorbent.

Precautionary measures:

Before use, test the color fastness of the surface to be cleaned.

In case of contact with eyes, rinse thoroughly with water and seek medical advice. Avoid prolonged contact with marble surfaces. 

Do not eat. 

If swallowed, rinse mouth, drink plenty of water, do not induce vomiting, seek medical advice immediately. 

Keep out of the reach of children.

Composition: 

Propylene glycol ether, mixture of hydrocarbons and terpenes, anionic surfactants 5-15%, water, sorbent.

Storage conditions: 

Store in a tightly closed container at temperatures from 5 ° C to 40 ° C in an upright position away from sources of heat, open flame and sunlight.

pH: no data available.