Pre-spray Enzime Hard Clean

Description

Release form:

Powder for solution preparation.

Purpose: 

The solution is intended for preliminary wetting of textile coverings that are resistant to moisture (including carpets, upholstery of upholstered furniture, floor carpets, draperies) before cleaning by extraction, including hot extraction. Enzyme Hard Clean contains a complex of active ingredients and enzymes, which effectively removes a wide range of contaminants containing proteins, fats and other stains typical of household and catering establishments.

Solution preparation:

Dissolve Enzyme Hard Clean in clean warm water in a proportion of 10-20 grams per 1 liter of water, until the components are completely dissolved. To enhance the cleaning power, it is permissible to add 25-50 grams of Cleaner Powder to 1 liter of Enzyme Hard Clean solution with water. Additionally, use warm water with a temperature of 40-60 ° C. Do not use hotter water (enzymes are inactivated and efficiency may be reduced).

Application:

Apply the solution to a textile surface using a coarse spray, brush or sponge. Typical dose of the working solution is from 50 to 300 ml per m2, depending on the type of textile covering and dirtiness. Spread the solution over the surface with a brush of suitable hardness, the better the dirt is mixed with the solution, the more efficiently the solution will be distributed and penetrate deeper into the dirt, the more efficient its work will be.

Carry out basic cleaning and rinse off the solution and the separated dirt with solutions of Extrakt Powder Biosolv, Extrakt 10 or rinse with Acid Cleaner.

Furniture upholstery, carpets used in everyday life must always be washed with Acid Cleaning solution after wetting with Enzyme Hard Clean.

Precautionary measures:

Pretest the product to be cleaned for color fastness. 

Avoid prolonged contact of the product with marble surfaces.

Avoid contact with eyes or esophagus.

In case of contact with eyes, rinse with plenty of water. 

The use of rubber gloves, aerosol masks and safety goggles is recommended. Keep out of the reach of children.

Composition: 

Oligomeric triphosphate, sodium carbonate, sodium hydrogen phosphate, sodium metasilicate, complexing agent, terpene hydrocarbon, anionic PAR 5-15%, enzyme complex.

Storage conditions: 

Store in a tightly closed container at temperatures from 5 ° C to 40 ° C in an upright position away from sources of heat, open flame and sunlight.

pH of the solution: 10.