Release form: powder for the preparation of a washing solution.
Purpose: the product is intended for cleaning waterproof, alkali-resistant textile coatings by the extraction method, including hot extraction. The effectiveness of the product does not depend on the hardness of the water.
Mix 25-35 grams (one scoop) of Extrakt Powder Biosolv with 10 liters of water until the product is completely dissolved. It is recommended to use water with a temperature of 30 ° C and above.
Pour the Extrakt Powder Biosolv solution into the extractor tank (vacuum cleaner) intended for the cleaning solution (clean tank)
Clean the textile surface while simultaneously delivering the solution to the surface and collecting it by aspiration (suction) with an extractor.
On products with high contamination, use solutions strengthened by adding Cleaner Powder (10-15 grams per 10 liters of solution), or pre-wet with Scaria Сleaner solution.
Furniture upholstery should always be washed with Acid Cleaner after cleaning with Extrakt Powder Biosolv according to the instructions.
Pretest the product to be cleaned for color fastness.
Avoid prolonged contact of the product with marble surfaces.
Keep out of the reach of children!
If swallowed, rinse mouth with plenty of water and seek medical advice immediately. In case of contact with eyes, rinse with plenty of running water and seek medical advice.
Store in a tightly closed container at a temperature of 5 ° C to 40 ° C in an upright position away from sources of heat, open flame, sunlight.
Composition: sodium triphosphate, surfactant mixture 5-15%, sodium carbonate, d-limonene.
pH of solution: 9.